I have a gc2300 that I am running 15-w40 Rotella in. It's wierd everytime the tractor get warmed up good, after about 10-15 minutes of using it, the oil pressure light flickers on. What is really strange is that it only comes on when the front end is pointed down hill. As soon as I turn up hill it goes out. Anyone ever have this happen or know what could be wrong with it?
Oil & Fuel gc2300 oil pressure
- Thread starter saustin
- Start date
- Views: 1936
DEWFPO
Veteran Member
- Joined
- Jun 2, 2007
- Messages
- 1,100
- Location
- "Up High in the Rockies"
- Tractor
- 2009 Bobcat Toolcat 5600 D
I use mine at all kinds of angles and never noticed this problem. I use 5W30 diesel oil however.
Is your oil right to the top of full?
All I can think of is that the heavier weight oil is taking longer to get back to the sump at that incline then the 5W30 does.
DEWFPO
Is your oil right to the top of full?
All I can think of is that the heavier weight oil is taking longer to get back to the sump at that incline then the 5W30 does.
DEWFPO
Yeah it is full to the top. I may have to try the 5w30 weight oil. I figured if it was the oil though that it would cause it to come on at any angle. Thanks for the tip , I will have to drain the oil and replace it. I just changed the oil a few weeks ago. Luckily it doesn't hold very much!