Backhoe GC2300 4 pt. backhoe subframe

[MF RED in MT]

I understand "it's more of a hobby for me to fabricate things like this", and you have my full support.

I am looking forward to reading/seeing all of your post throughout your build.

KC

 

[ray66v]

Good luck with your project.

 

[jeepcj7]

Look at AGCO's online parts book - that will give you an idea of what the backhoe subframe look like

 

[Masseyguy]

AGCO online parts book is a pretty resourceful tool and I've used it for many things. However It doesn't have all of the pieces together (levers/subframe/wiring/etc...) so that you could see if there would be interference with parts on my tractor.. Just wasn't sure how much of a difference there was between a 2300 and 2310. Doesn't appear as though there's much difference underneath (except the obvious subframe)! Seeing the physical underside of the tractor is very helpful (shoutout to Irvingj!)..

 

[irvingj]

Yer welcome -- holler if you need more pics. Looks like I'll be using the blower again this afternoon.....

 

[jeepcj7]

The tractor sub frame and loader mounts are identical between tractors with and with out the factory back hoe option. The differences are lower 3 point arms, seat assy, ROPS, filter guard and hydraulic power beyond couplers/plumbing to the rear of the tractor.