Gage wheel project

   / Gage wheel project #31  
May I ask where you got your wheels and what did they cost? Also, did they come with a tall shaft or did you have to weld that on?
 
   / Gage wheel project
  • Thread Starter
#32  
The tires were from HF on sale at about $8 each. The forks were purchased from the Kubota dealer for under $50 for the pair.

The tires from HF came with a set of straight forks that can be bolted to something, no swivel. Normaly these are about $15 each if memory serves correctly. I've seen them at TSC as well but a little more money.

The Kubota forks are basicaly factory. I did have to spread the forks about a 1/4" or so with the porta power and drill the bolt hole a little bigger.
 

Tractor & Equipment Auctions

1990 KME (A53424)
1990 KME (A53424)
2018 TAKEUCHI TL12V-2 SKID STEER (A51242)
2018 TAKEUCHI...
2016 Chevrolet Tahoe SUV (A55853)
2016 Chevrolet...
2007 Pierce Dash Truck (A55973)
2007 Pierce Dash...
Massey Ferguson 4608 (A53317)
Massey Ferguson...
406 (A52706)
406 (A52706)
 
Top