I have about 900 hours on my tractor. I mow about four acres and it is very rough due to night crawlers. The hydrostatic pedal no longer returns to neutral from both the forward and reverse positions. I have: replaced the ball bearing that centers the valve shaft -- replaced the centering spring -- made sure the linkage is lubricated and free moving -- adjusted the centering of the hydrostatic valve. I am beginning to believe the problem is wear on the valve shaft. Has anyone had this problem and did they have to totally disassemble the hydrostatic transmission to repair it?
G1900 sticking hyd pedal
- Thread starter andmfg
- Start date
- Views: 1580
-
- Tags
- kubota g1900