Tractor Sizing G152 with post hole digger?
- Thread starter msjanket
- Start date
- Views: 1544
lens12
Veteran Member
- Joined
- Apr 7, 2000
- Messages
- 2,113
- Location
- Dixon, Il
- Tractor
- ford 9700, tw30, massey, jd2030 jd4010, yanmar F60d, ym330d, ym276d,ym226d,ym186d, ym2000, ym155
It will work fine. It doesn't take much power. Don't let it drop to fast or it might not be able to pull the auger out og the ground.
amanda11270
Silver Member
I was debating the same, it never surprises me what my Iseki tractor can do.
Jimbo16720
Silver Member
I have both the 6 and 9 inch augers and they dig good. They best way I found is to dig at 540rpm and work it out often the deeper you go or it hangs up. I've dug roughly 250 since last year with mine. If you go down to 3 foot deep it hangs up often unless you have no rocks or roots where you are digging. I did 75 holes for a guy putting deer fence up and alot of them had to be pulled out with his backhoe.:thumbsup:
