ford model 1700 need to remove the engine

cappysvg · Jun 1, 2020

I have found that my tractor will not start because the crank shaft bearings are bad and need to replace them so I need to remove the engine and it looks like I have to slip the tractor to get the engine out ant buddy done this before and have some good info?

Agvg · Jun 2, 2020

Does it not turn? Or what symptoms does it have?

cappysvg · Jun 2, 2020

No it does not start does turn over and you can here the bearing grinding on the second time you crank it over.

Agvg · Jun 3, 2020

Have you used it without oil pressure or oil? No reason for it to not start even with bad bearings, does it turn slow? If your analysis is right you need a new crankshaft or machine it.

cappysvg · Jun 6, 2020

Yes we had a oil line break and drained the oil did not notice it but a day later we were unable to start it and it sound like it is turning slow. I need help with splitting the tractor and parts and part #'s please and thanks.

fried1765 · Jun 6, 2020

cappysvg said:
Yes we had a oil line break and drained the oil did not notice it but a day later we were unable to start it and it sound like it is turning slow. I need help with splitting the tractor and parts and part #'s please and thanks.

Please add your location to your profile.