Ford 5610 rear stabilizer bar help

[sawtooth]

Can you send me a pic of them installed on your tractor? Just can’t picture how they hook up. Thanks

 

[ovrszd]

You bet. I'm on my phone. In mornin I'll get on shop computer an attach what I can find. Remind me if I forget...

 

[sawtooth]

I’m a little gun shy as the first set I ordered for my 4610 would not work. If I remember correctly the bolt/pin diameter was too small where it connects to the lift arms. To make it work I was going to need to switch lift arms or drill existing ones out but was worried that might compromise the arm strength.

 

[DLTTrekkers]

stibalizerchain runs from the outside (not inside) to the arms and sould have its anckerpoint inline with the lowerpoint attach to the tractor. Yours will brake when impl is atached.

 

[DLTTrekkers]

 

[ovrszd]

I've got hundreds of pics of my tractor but can only find one that include the stabilizers. I'm going to the farm where it's parked today. I'll get better pics.

My stabilizers came with brackets that U-bolted to the axle housing outside the fender/ROPs brackets. Then bolted to the lift arms. I don't recall having to drill my arms.

Here's a pic that barely shows the axle end.

 

[DLTTrekkers]

remove that chain

 

[DLTTrekkers]

 

[ovrszd]

Here's a couple pics of mine.

 

[ovrszd]

remove that chain

When I bought my tractor that's the exact setup it had. Installed at the factory.

I switched so I had better adjustability.