jhp123
Member
- Joined
- Dec 16, 2013
- Messages
- 28
- Location
- VA
- Tractor
- 1965 ford 5000 2000 new holland 1920 4wd, 1974 ford 5000, 1975 ford 9600, 1988 case Ih 885
I have a Ford 5000 that had hydraulic fluid coming out of the top of the steering wheel. We took it apart and replaced the seal inside that goes around the steering shaft. After we put it back together and added the fluid back it would turn to the right very well but turning back to the left was extremely difficult. Looking into the reservoir i also noticed lots of air bubbles in the fluid. Any advice as to what we may have reversed or put back together incorrectly?
