Ford 4600 coolant mixing with oil

   / Ford 4600 coolant mixing with oil #1  

Forestry man

New member
Joined
May 31, 2016
Messages
3
Location
North Carolina
Tractor
Ford 4600
Checked oil level in tractor and everything looked fine, started tractor and had some slobber coming from exhaust pipe, drove it down the road, had not been on it for around 10 minutes when the engine died, got out and checked engine oil and it was a milky color, and the same milky colored oil was coming out around exhaust manifold gasket, any help would be much appreciated!
 
   / Ford 4600 coolant mixing with oil #2  
How many hours on your tractor? First thing that comes to mind is a head gasket. Just had a friend's 4610 that did the same thing. In his tractor the engine was OK. Take it to a good diesel mechanic or your nearest dealer.
 
   / Ford 4600 coolant mixing with oil
  • Thread Starter
#3  
Thanks for the info, head gasket was what I was thinking too.
 
   / Ford 4600 coolant mixing with oil #4  
What condition is coolant? Besides blown head gasket it's also possible cylinder wall has a hole in it from cavitation(electrolysis). I bought a 6700 several yrs back that had a crate engine installed due to cavitation of cyl wall of old engine.
 
   / Ford 4600 coolant mixing with oil
  • Thread Starter
#5  
Thanks for the reply, the coolant has mixed with the oil and has turned the oil a milky color, the oil and coolant was also leaking a little right below the exhaust manifold.
 

Tractor & Equipment Auctions

2014 CATERPILLAR CT660S SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
2020 JOHN DEERE 7R210 LOT IDENTIFIER 46 (A53084)
2020 JOHN DEERE...
UNUSED JCT 60" HD HYD CONCRETE MIXER (A51248)
UNUSED JCT 60" HD...
434669 (A48836)
434669 (A48836)
CASE IH 2555 4R COTTON PICKER (A51247)
CASE IH 2555 4R...
2024 TIMPTE HOPPER 43FT HOPPER TRAILER (A53426)
2024 TIMPTE HOPPER...
 
Top