belandon
New member
I have a early model Ford 3000 that set up for several years. Lift worked then but not after I got it running again. Control lever has no tension on it. Any suggestions where I should start?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
check to see if you have oil in the rear/hyds sump. pull plug under seat on 3x5 cover and crank over to see if you have oil prime. next. check in draft and position control... if all that checks.. and nada.. get a top cover kit and pullt he top cover for a looksee.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
top cover kit with gaskets and orings is usually pretty cehap. like 15$ or so. or was a year or so ago..
