Ford 2N

   / Ford 2N #1  

slim357

Bronze Member
Joined
Dec 18, 2018
Messages
55
Tractor
Ford 4110
How do I remove the front end on a 2N Tractor? Does the bolt just unscrew?
 
   / Ford 2N #2  
IMG_4423.JPG

In the picture, part 20413-S unscrews. Part 3126 then can be pulled out ( perhaps easier said than done) to remove the pivot beam.
 
   / Ford 2N #3  
Remove the retaining bolt and hope the pin will move, most are either so worn or rusted they are near to impossible to remove. Sad fact is many of the old Fords have been let go for so long the bolster itself is worn out and have to be rebuilt. There was a guy on eBay that sold plates that could be welded onto the bolster to bring it back to spec, I do not know if he or anyone still makes them.
 

Tractor & Equipment Auctions

2019 Ford F-350 XL (A50120)
2019 Ford F-350 XL...
NEW Wolverine 72'' Skid Steer Ripper (A53002)
NEW Wolverine 72''...
LOAD OUT INFORMATION (A53084)
LOAD OUT...
NEW Wolverine Skid Steer Trencher (A53002)
NEW Wolverine Skid...
48" Skid Steer Pallet Forks  (A52384)
48" Skid Steer...
2015 Ford F-150 4x4 Crew Cab Pickup Truck (A50323)
2015 Ford F-150...
 
Top