Ford 2N

   / Ford 2N #1  

slim357

Bronze Member
Joined
Dec 18, 2018
Messages
55
Tractor
Ford 4110
How do I remove the front end on a 2N Tractor? Does the bolt just unscrew?
 
   / Ford 2N #2  
IMG_4423.JPG

In the picture, part 20413-S unscrews. Part 3126 then can be pulled out ( perhaps easier said than done) to remove the pivot beam.
 
   / Ford 2N #3  
Remove the retaining bolt and hope the pin will move, most are either so worn or rusted they are near to impossible to remove. Sad fact is many of the old Fords have been let go for so long the bolster itself is worn out and have to be rebuilt. There was a guy on eBay that sold plates that could be welded onto the bolster to bring it back to spec, I do not know if he or anyone still makes them.
 

Tractor & Equipment Auctions

2019-2024 Dodge Ram Front Bumper (A49461)
2019-2024 Dodge...
2017 JCB 3CX 15HFCE BACKHOE (A51242)
2017 JCB 3CX...
2013 Chevrolet Tahoe SUV (A49461)
2013 Chevrolet...
24 Foot Wells Cargo Enclosed Trailer (A50324)
24 Foot Wells...
2006 INTERNATIONAL 7600 T/A DUMP TRUCK (A51406)
2006 INTERNATIONAL...
2023 Bobcat T770 Skidloader (RIDE AND DRIVE) (LIKE NEW) (A50774)
2023 Bobcat T770...
 
Top