Ford 2110 Hydraulic issues

   / Ford 2110 Hydraulic issues #1  

jefmfree

New member
Joined
Oct 14, 2012
Messages
18
Location
Tennessee
Tractor
2110
When I have an implement on the 3 point, the tractor will lift it great (@ idle) before it warms up. Once the tractor gets warmed up, I have to increase the rpms to get the implement to raise. An hour or so later, I will not be able to raise the implement half the height as I could before the tractor warmed up. Any ideas??? Thanks.

This is the 2110 compact series (1984)
 
Last edited:
   / Ford 2110 Hydraulic issues #2  
You do know that hyd fluid gets thinner as it heats up.

It is common for cold fluid to make things work better than when hot.

You might try a fluid designed for your operating environment.

You might also have some worn parts that fluid is bypassing.
 
   / Ford 2110 Hydraulic issues
  • Thread Starter
#3  
Yes, I am aware of the viscosity changes. Just don't understand why at start up I can fully lift implement at an idle, then 30 minutes later not be able to lift implement half the height at WOT. I am going to change fluid and filter to see if that helps. Thanks for the suggestions.
 
   / Ford 2110 Hydraulic issues #4  
You might also take some pressure readings to help trouble shoot the problem.
 
   / Ford 2110 Hydraulic issues
  • Thread Starter
#5  
Any idea what the readings should be?
 
   / Ford 2110 Hydraulic issues #6  
A manual would be most helpful.

Contact the FORD tractor dealership, and they should be able to tell you the relief pressure.
 
   / Ford 2110 Hydraulic issues #7  
   / Ford 2110 Hydraulic issues
  • Thread Starter
#8  
Where on the hydraulic line do I need to test the pressure?
 
   / Ford 2110 Hydraulic issues #9  
If you have a loader and QD, just plug the gage into one of the QD's.

If you want to permanently mount the hyd gage, insert it in a tee in the IN port of the loader valve.

If no loader, find a fitting just after the pump and mount the gage in a tee in the pressure line.
 
Last edited:
   / Ford 2110 Hydraulic issues
  • Thread Starter
#10  
What about using one of the rear remotes?
 

Tractor & Equipment Auctions

2007 STERLING T/A DAY CAB ROAD TRACTOR (A51243)
2007 STERLING T/A...
(4) 12' Steel Gates (A50515)
(4) 12' Steel...
Set Yield 360 Y Drops (A50514)
Set Yield 360 Y...
IH 490 Disk (A50514)
IH 490 Disk (A50514)
2018 FREIGHTLINER 108SD DUMP TRUCK (A51406)
2018 FREIGHTLINER...
ALL ITEMS NOT PICKED UP IN 30 DAYS WILL BE RESOLD FOR STORAGE!! (A50775)
ALL ITEMS NOT...
 
Top