Mike1208
New member
Anyone have any tips on how (if at all) to get the bushing out of the top link rocker? Mine need to be replaced. I tried hitting it and soaking it some, have Kroil on order. Don't want to bust the rear housing though...
TractorTech
Elite Member
- Joined
- Jan 26, 2012
- Messages
- 2,801
- Location
- California
- Tractor
- Ford 7710, Ford 550, Ford 1910, Ford 4430, KD Forklift, Ford LGT17H, New Holland L255 Skidsteer
Heat it, then let it cool. Spray with pentetrating oil. Try to knock out. Repeat if necessary.
If all else fails, carefully slot the bushing with a cutting torch and knock out.
If all else fails, carefully slot the bushing with a cutting torch and knock out.
OP
Mike1208
New member
Thanks for the tip.
My 2000 is a 1966 model, 3 cylinder. I believe the previous generation had the same style rocker but I guess that's incorrect.
My 2000 is a 1966 model, 3 cylinder. I believe the previous generation had the same style rocker but I guess that's incorrect.
Texasmark
Elite Member
- Joined
- Apr 24, 2012
- Messages
- 3,703
- Location
- N. Texas
- Tractor
- Ford: '88 3910 Series II, '80 3600, '65 3000; '07 6530C Branson with FEL, 2020 LS MT225S. Case-IH 395 and 895 with cab. All Diesels
My '65 3000 has a solid pin. I used to have a 66 3000 also and noticed numerous changes over the 65...manufacturing reductions to cut costs. 65 was the first year for the 3 cyl. and like other things (An '88 Ford turck I had as compared to 89 and 90 models) later issues are scrutinized for areas to reduce costs and still maintain functionality.
