I have a 1985 or so Ford 1510, with an injector rack that kept seizing up. When I pulled the injector pump, I found no oil in the pump sump. If I pour oil into the sump, it just runs into the block? I have the timing cover off now, but can't see how oil gets to the sump. Bearings in sump are of course dead. Block was rebuilt/replaced by unknown past owner, did they leave something out? Help, tractor is on small island overseas and used by local Fire/Rescue dept., so I can't take it to dealer. Thanks Jerry
thcri
Elite Member
Jerry,
It would be best if you post in the Ford/New Holland section. I think you will get better responses and you could make it all in one post. As far as parts, go to your local Ford New Holland dealership. There should be one in your area.
Also welcome to TBN. It would also help if you go back in and fill in your profile as to the area you live in. This way local people can help you.
murph
It would be best if you post in the Ford/New Holland section. I think you will get better responses and you could make it all in one post. As far as parts, go to your local Ford New Holland dealership. There should be one in your area.
Also welcome to TBN. It would also help if you go back in and fill in your profile as to the area you live in. This way local people can help you.
murph
thcri
Elite Member
Click on My Home at the top next to the Main Indes/Search and then edit profile.
murph
murph