Ford 1220 Three Point not holding

   / Ford 1220 Three Point not holding #1  

Justadudewithatractor

Bronze Member
Joined
Nov 19, 2020
Messages
58
Tractor
1979 Ford 1700
Hi and again, thanks in advance,

The three point lifts and operates almost as should, but as soon as I turn the tractor off, the three point lowers to the ground with the lever in the up position. There's a trim mower on the back at the moment and it never did this. I'm thinking there might be a crack in the ring on the piston. I haven't checked because it's a TIGHT area under the seat.

This started about a month ago when the adapter for the return line cracked. We fixed that, but now this is happening.

Any suggestions?

Thanks!

NOTE: I just ran the tractor for about 1.5 hours. I was hearing some loud noises coming from under the seat and the three point lift was barely operational. In my limited experience, that points to the ring around the piston. I think! Thanks again!

NOTE: Just started the tractor fairly cool and the 3point lifted no problem. I believe the type of hydraulic fluid is the issue. The owner of the tractor put 132 in and I believe it needs 134D. I'll start there.
 
Last edited:

Tractor & Equipment Auctions

2014 Jacobsen AR3 Commercial Mower (A53421)
2014 Jacobsen AR3...
8' LARGE FENCE POSTS (APPROX. 20-25 PC) (A54757)
8' LARGE FENCE...
UNUSED FUTURE 24" PIN ON BUCKET (A54757)
UNUSED FUTURE 24"...
2020 CATERPILLAR 299D3 XE SKID STEER (A52705)
2020 CATERPILLAR...
VENTRY FAN / BRUSH BURNING SKID (A55745)
VENTRY FAN / BRUSH...
UNUSED FUTURE XKH39 - 39" MINI HYD 4N1 BUCKET (A54757)
UNUSED FUTURE...
 
Top