Ford 1210

   / Ford 1210 #2  
Unscrew from head
 
   / Ford 1210 #4  
Use the big hex..
Otherwise u stand a good chance in unscrewing the 2 half’s of the injector..& u DONT want THAT TO HAPPEN..
Same with torquing it back down..BIG HEX.
 
   / Ford 1210
  • Thread Starter
#5  
Ok thank you
 
   / Ford 1210
  • Thread Starter
#6  
Use the big hex..
Otherwise u stand a good chance in unscrewing the 2 half’s of the injector..& u DONT want THAT TO HAPPEN..
Same with torquing it back down..BIG HEX.
Use the big hex..
Otherwise u stand a good chance in unscrewing the 2 half’s of the injector..& u DONT want THAT TO HAPPEN..
Same with torquing it back down..BIG HEX.
That big hex is about 1 inch or bigger correct
 
   / Ford 1210 #7  
I wanna say 1-3/16”.??
I’ll know for sure when I get back to the shop..
 

Tractor & Equipment Auctions

2004 CATERPILLAR D6R XL CRAWLER DOZER (A51406)
2004 CATERPILLAR...
1 Bridgestone 255/70R 22.5 and 1 Toyo M-872 12R 22.5 Tires (A51573)
1 Bridgestone...
2013 FREIGHTLINER EXT CAB SERVICE TRUCK (A51406)
2013 FREIGHTLINER...
Neckover GL24-2-7K Gooseneck Trailer  24ft Deck, Dual 7K Axles, 14K GVWR (A53472)
Neckover GL24-2-7K...
2018 Lexus IS300 Sedan (A51694)
2018 Lexus IS300...
2019 CATERPILLAR 299D2 XHP SKID STEER (A51246)
2019 CATERPILLAR...
 
Top