Ford 1210

[ALB]

Oil pressure light came on. I jiggled the wires at the bulb and it went off. Now I don't know if i have pressure or not. Where is the oil pressure sensing unit located? I'd like to test the oil pressure.

Thanks

 

[ALB]

replaced the oil sensor and all the light bulbs and now everything works.

Question: when it is running the water high temp lights flickers. after a while it doesn't come on.

Any idea?

 

[chim]

Welcome aboard! I'd try going over the connections first. I had trouble with the battery not charging on mine. Turned out to be dirty contacts in a plug under the instrument panel. I SHOULD check, clean and use some Penetrox or equal on all the connections before Winter.

My 1210 acts a lot larger than it looks. It's a scrappy little thing. This past Winter a couple friends used it with a 5' rear blade and they were really surprised with its capabilities.

 

[beeforty]

replaced the oil sensor and all the light bulbs and now everything works.

Question: when it is running the water high temp lights flickers. after a while it doesn't come on.

Any idea?

My 1200 water temp lite started coming on almost immediately when I started it up, very dimly. After checking belt tension etc. I replaced the sender and put in a new thermostat just to be sure , no more lite. Except if I don't keep the screen in front of the radiator clean from dust and debris, I've had it only start flickering once.