Flux Core vs MIG - best YouTube comparison I've seen

   / Flux Core vs MIG - best YouTube comparison I've seen #21  
Agree. But I've never found a YouTube video with a good comparison of FC wires. We should suggest that to Project Farm!
I generally have bought my flux core from Amazon and have read those reviews.
I also buy name brand wire, not the generic brands.
My last wire was Forney 42300 mild steel.
Very little splatter to clean up.

51JlhiUbQGL._AC_SL1260_.jpg
 
   / Flux Core vs MIG - best YouTube comparison I've seen #22  
I've only ever had experience using flux core with a small suitcase style 110v welder. I'll build something out of wood before I trust the little units. I don't seem to ever be able to get any penetration.
Try leaving a root gap - 1/16-1/8" and see if it makes a difference. Also vary your distance between the gun and the work piece. Both of those should produce noticeable differences. about 30 years ago my first wire feeder was a 120v Century welder. With tight gaps I would sometimes produce cold looking beads. Leaving a decent root gap and I was able to squeak out all the power I could from that little welder.
 

Tractor & Equipment Auctions

2007 Amkus Rescue System (A50322)
2007 Amkus Rescue...
INGERSOLL RAND G40 GENERATOR (A50854)
INGERSOLL RAND G40...
AIR POWERED TONGS (A50854)
AIR POWERED TONGS...
1996 Chevrolet IMPALA SS (A51222)
1996 Chevrolet...
2017 John Deere 855D 4x4 Gator Utility Cart (A50322)
2017 John Deere...
Toyota 6FGU25 Forklift  5,000 lb Capacity (A51039)
Toyota 6FGU25...
 
Top