FLUIDS DUMP

/ FLUIDS DUMP #1  

MISSION JOE

Member
Joined
Aug 26, 2013
Messages
27
Location
MISSION B.C
Tractor
2010 JINMA 404 FORD LGT 125
JUST BOUGHT A JINMA 404 WITH A HUNDRED HOURS ON THE CLOCK . DON.T KNOW IF THE FACTORY FLUIDS WERE EVER DUMPED , HAVE HEARD THEY SHOULD BE . ANY OPINIONS ON THE SUBJECT ?
 
/ FLUIDS DUMP #2  
With 400 hours, all the fluids should be changed, regardless of whether they're factory or after-market. Cheap protection. Also, adjust clutch, tighten all bolts, adjust valve lash and re-torque the head gasket.
 
Last edited:
/ FLUIDS DUMP #3  
And when Rich says Tighten ALL bolts, he means ALL the bolts:)
 
/ FLUIDS DUMP
  • Thread Starter
#4  
THANX FOR REPLY. GOT A HANDLE ON MOST OF THE FLUID CHANGE , BUT THE INJECTOR PUMP FLUID CHANGE . ????
 
/ FLUIDS DUMP #5  
Drain bolt on the bottom of most of them, if not you may have to suck it out with a squeeze bulb. Fill to the dipstick mark with engine oil. You fill it either through the dipstick or the mushroom-shaped cap on the top. If the drain bolt is on one side/end there may be a bolt directly above it that is the witness hole - pull that bolt and fill with new fluid until it weeps out the upper bolt then button things up.
 

Marketplace Items

Ford Metal Tailgate Sign (A64557)
Ford Metal...
2007 JOHN DEERE 350D LC EXCAVATOR (A65053)
2007 JOHN DEERE...
2010 Brenner Aluminum 407 T/A Chemical Tanker Trailer (A64194)
2010 Brenner...
2011 Peterbilt 6x4 Water Truck w 52,000 GVWR, and 2,000 Gallon Tank (A63689)
2011 Peterbilt 6x4...
2019 Chevrolet Malibu Sedan (A64557)
2019 Chevrolet...
WESTFIELD WR641 - 6" X 41' GRAIN AUGER (A64278)
WESTFIELD WR641 -...
 
Top