Finding N on hydro?

[czechsonofagun]

On my B1750 I seem to have problems finding the Neutral on HST. It takes a lot of precise movement to set the lever just right and even than it sometimes goes to forward nebo backward. Is it something I can adjust, or is it just the age?

The tractor is in pretty good shape with 1156 hours on it, recently I replaced the fluid for Kubota Super UDT, but the issue prevails.

Thanks for any idea

 

[Egon]

My tractor [B7100HST] is in the shop right now to get the creep fixed.

Check the linkage for slop. On mine there is also a wobble plate type adjustment on the left side of the transmission. It's covered by a bolt that has to be removed and then a screwdriver for the adjustment.

 

[czechsonofagun]

Thanks, I will look into it.

 

[coldkubota]

Have you had any success?
I can't help you out on any specifics but I have a copy of the service manual that covers the B1550 and B1750 If that will help.
I can scan the few pages in the manual that covers the adjustments and PM them to you if it will help.