Usmcsrt1
Member
Roger.
Filters
- Thread starter TractorDeacon
- Start date
- Views: 10481
mike69440
Elite Member
- Joined
- Jun 2, 2005
- Messages
- 3,300
- Location
- Central NH (God's Country)
- Tractor
- 2005 L39 Kubota, 2020 Polaris 570 Sportsman, 2006 RTV 900, 2019 RTV1100C, 1997 Komatsu PC75UU2E w/ Thumb & Blade, 2013 Mahindra Max28XL Shuttle plus many attachments
If you think the Mahindra fitters cost, my L39 Kubota takes 2 filters due to the size of the hydraulic pump, each about 8" long with internal magnets, Cost about $70 each!, But I sometimes can find them on eBay. They are better built than aftermarket, with specific relief valve settings and the magnets, Which by the way really stick to our 'Stainless" Frig.
OP
TractorDeacon
New member
Guess I should feel lucky. My dealer gave me a price of $60 and I only need one. When you consider thread size and flow rates guess i better stick with the OEM. I appreciate all the replies.
Jabonee
Platinum Member
Jiminy crickets. I had know idea those filters were that salty. I just look at our current pricing for the 3016 hyd filters.$54 for the HST and$61 for the main hyd. I'll have to tell the parts counter people to give the customers a reach around when the come in for filters.
OP
TractorDeacon
New member
I found this link. I know nothing about this company or the parts they carry. (My disclaimer) investigate for yourself but they carry some type of Mahindra hydraulic filters for a lot less.Jiminy crickets. I had know idea those filters were that salty. I just look at our current pricing for the 3016 hyd filters.$54 for the HST and$61 for the main hyd. I'll have to tell the parts counter people to give the customers a reach around when the come in for filters.
All States Ag Parts | Tractor, combine, skid steer parts | New, used & rebuilt parts
OP
TractorDeacon
New member
Those with 15 & 16 Series Mahindra might want to check this site selling the hydro filter for $33
Mahindra Hyd Filter 19682581 Keno Tractors
Mahindra Hyd Filter 19682581 Keno Tractors
OP
TractorDeacon
New member
I was told (not verified yet) that #19682581000 is the Mahindra part number for the hydro 15 & 16 series and the Max. The above link on my last post came up when I Googled the number...just saying.
mike69440
Elite Member
- Joined
- Jun 2, 2005
- Messages
- 3,300
- Location
- Central NH (God's Country)
- Tractor
- 2005 L39 Kubota, 2020 Polaris 570 Sportsman, 2006 RTV 900, 2019 RTV1100C, 1997 Komatsu PC75UU2E w/ Thumb & Blade, 2013 Mahindra Max28XL Shuttle plus many attachments
Big thread inlet looks correct, however with freight, cost may be close
Jabonee
Platinum Member
That is a good number for the 3016 and 3616. Also used on MAX 22,24,25 and 26. :thumbsup:
something your going to change once a year costing $70 is not bad at all. Hydraulic filters and HST filters are always going to be higher than the others.. and now T4 fuel filters have become higher than normal but we are talking about good spin on filters instead of paper.. which is still on some of them as a primary.. still most can get out the door around $200-$350 depending on what you do with your full service.. mines around $250 on my massey...
