FEL level indicator

[ACHINBAC]

Waxman,

If you won't spring for the new hoodie, how about a new stainless nylon ball bearing marine spinner???

Dave

 

[WaxMan]

Hey at least you have a heated garage to play in, a lot of owners have their tractors outside. I see the kids have their toys and so does Dad .
That is one mean looking canopy, your design?

 

[WaxMan]

Waxman,

If you won't spring for the new hoodie, how about a new stainless nylon ball bearing marine spinner???

Dave

Now that is something I really want , I have been looking around the net for a good spinner but not impressed with anything I've seen until that one.
Most are big giant riveted clamps , where can I get one? Don't tell me you made it

 

[ACHINBAC]

Roger,

West Marine has them & others may - you will be impressed, the manufacturor is "Edson", be prepared for sticker shock, but is good as it gets . . . The canopy was a "labor of love" last winter > next roll of the cards;

Dave

 

[ACHINBAC]

Missed a pic, here you go . .

 

[WaxMan]

Pretty clever you are, really a nice job, What's up with the paint on it , does it double as a tarp?
You should make them for Kubota.

Is this the knob you have, looks like you have a clamp, the picture looks like a strap? Is it nice and tight on the steering wheel? Your opinion the clamp was better then the strap. I want it as slim as possible.
Overton's - Edson Pro Series PowerKnob stainless steel

 

[ACHINBAC]

As I recall, I may have gutted the Edson knob & had to re-tool the bottom clamp to mate from another lost cause. The strap you mention rings a bell . . . I may have wanted a better footing for the mount - hard to remember at this late hour & may never will. The spinner is like jewelry though - nough said - with power steering my clamp set up works well. You may find a better knob, but I couldn't.

Dave

 

[ACHINBAC]

Roger,

Did not get the "Tarp" question initially, but here is you answer; an old cover up trick for less than stellar surfaces - a distraction if you will - the cap's finished surface from the source was a bummer and was dealt with accordingly.

Dave

 

[WaxMan]

Roger,

Did not get the "Tarp" question initially, but here is you answer; an old cover up trick for less than stellar surfaces - a distraction if you will - the cap's finished surface from the source was a bummer and was dealt with accordingly.

Dave

No I knew that it looks good, no one would splatter paint that evenly , I like it.
Still cant believe what a nice job you did.

NEED your opinion on this , I figured I used this thread to long for other purposes , let me know what to do

.Opinions Needed Please , Pictures of Running lights on my Kubota b3030 cab - TractorByNet.com

 

[ACHINBAC]

Pardon all , I must away to the monster garage to ponder the next upgrade

Yes, was done with small hand tractors . . .