flyinfarmer
New member
- Joined
- Jan 30, 2012
- Messages
- 1
- Tractor
- Farmall A
Does anyone know if an old Farmall A can be retrofitted with three point arms?
3-Point Hitch Farmall A 3pt addition
- Thread starter flyinfarmer
- Start date
- Views: 14820
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,601
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
Worksaver made one for the Super A's, 100's etc., but used the existing hydraulics, and lift system. Looks like the top link attached to the rock shaft, and lift on the left arm, attached to the lift system.
Hydraulics may be the expensive part, and off center PTO will probably limit you to non-pto work/attachments.
Hydraulics may be the expensive part, and off center PTO will probably limit you to non-pto work/attachments.
Attachments
flusher
Super Member
- Joined
- Jun 4, 2005
- Messages
- 7,572
- Location
- Sacramento
- Tractor
- Getting old. Sold the ranch. Sold the tractors. Moved back to the city.
I have a 3pt on my 1951 Farmall Super A
Tractor came with it (it's a Caltrans mowing tractor with a mid-mount sicklebar mower). The 3pt looks like an aftermarket kit.
Good luck.
RHemmer
Member
I am also wondering about a 3pt on my Farmall A , not the super A....
I have heard of people using power steering pump for the hydro and used 3pt parts off other older tractors to complete, but have never seen this. I might try, this but would love to hear of someone that all ready has.
I have heard of people using power steering pump for the hydro and used 3pt parts off other older tractors to complete, but have never seen this. I might try, this but would love to hear of someone that all ready has.
