Exmark Belt twisted

   / Exmark Belt twisted #1  

kc5dlo

Gold Member
Joined
Mar 10, 2002
Messages
300
Location
East Texas
I was mowing the yard yesterday when a noise started. I shut the machine down to investigate and found the belt that runs from the PTO clutch to the deck was twisted several times between the fixed idler pulley and the deck. That caused the tension pulley to pull up and start rubbing on the frame. I am guessing that is what was making the noise. The belt is also frayed on the edges. I saved the old belt from last winter when I changed all the spindles, belts and pulleys so I can get back to work without any delay.
My question is what caused the belt to twist? My neighbor is speculating that the grass being taller than I normally let it get, put too much load on it and caused the twist. Any ideas?
 
   / Exmark Belt twisted #2  
Don't know, I have had them twist in the past, just untwisted and increased the tension a little and kept using the belt.
 

Tractor & Equipment Auctions

Killbros 260 Seed Conveyor (A52128)
Killbros 260 Seed...
(INOP) CASE IH MAGNUM 180 TRACTOR (A50459)
(INOP) CASE IH...
2018 KENWORTH T370 T/A DUMP TRUCK (A51406)
2018 KENWORTH T370...
Non running toro mower (A48082)
Non running toro...
Ditch Witch 6510A Trencher - Deutz Diesel, Backhoe, Cable Plow, Front Blade (A52128)
Ditch Witch 6510A...
2024 AGT INDUSTRIAL HR-230 3-WHEEL LOADER (A51242)
2024 AGT...
 
Top