ex3200tl enough rough cut horse power

   / ex3200tl enough rough cut horse power #1  

JWB53

Bronze Member
Joined
May 23, 2008
Messages
68
Tractor
07 toolcat
looking at ex3200tl, 99% of it's work will be mowing, want to use 6 - 8 foot rough cut deck, do ya think it has enough power, mostly flat to little slope property, cutting 1 to 2 foot high grass thanks
 
   / ex3200tl enough rough cut horse power #2  
Guess that would be 32 hp?? If that is what 3200 stands for,than don't think so,6ft might work,but 5ft would be the size most suitable.
 
   / ex3200tl enough rough cut horse power
  • Thread Starter
#3  
yes it's 32 hp, i need hydrostatic drive, and like the 17,800 price, but to increase hp what model do you think i need thanks
 
   / ex3200tl enough rough cut horse power #4  
I don't know about the models of this brand,general rule is 25 hp for 5 ft cutter,30 hp for 6 foot cutter[5hp per foot].
You could use a 6foot on that 32hp probably no problem,but wouldn't think anything bigger.[also depends on pto hp as opposed to engine hp],depends on weight of tractor,etc.

So if above is correct than 40 -45 hp for 8 foot cutter

On the other hand my ck30 kioti's book says it has 23 pto hp,I use a 5 foot cutter and pretty sure I would have no trouble with a 6 foot cutter,even in tall heavy grass.

Another thought would be weight of a big cutter,[not sure how big the three point lift ones go up to],the bigger ones are just a pull type,and how narrow a place you can get a bigger one through.
 

Tractor & Equipment Auctions

2015 Chevrolet Silverado 1500 4x4 Crew Cab Pickup Truck (A53422)
2015 Chevrolet...
1978 Taylor TY-250M Forklift (A53117)
1978 Taylor...
THE HANDLER II MIXER UNIT (A53843)
THE HANDLER II...
2018 Toro Workman GTX Electric Utility Cart (A51694)
2018 Toro Workman...
Husqvarna YTH 18542 Riding Mower (A53117)
Husqvarna YTH...
Drafting Table (A51695)
Drafting Table...
 
Top