Egon's Millworks

   / Egon's Millworks #1  

Egon

Epic Contributor
Joined
Aug 14, 2001
Messages
22,507
Location
Nova Scotia, Canada
Egon\'s Millworks

Sawmill in action.

Egon /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 
Last edited:
   / Egon's Millworks
  • Thread Starter
#2  
Re: Egon\'s Millworks

Reawing boards /forums/images/graemlins/smirk.gif

Egon /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 
Last edited:
   / Egon's Millworks #3  
Re: Egon\'s Millworks

A wooden mallet with a square handle? Don't believe I've ever seen one like that before.
 
   / Egon's Millworks
  • Thread Starter
#4  
Re: Egon\'s Millworks

The handle is a little rounded and the head is filled with lead. It's a one of product of the millworks Bird.
Egon
 
   / Egon's Millworks #5  
Re: Egon\'s Millworks

Looks like entirely too much fun Egon, I'm envious /forums/images/graemlins/smile.gif
 
   / Egon's Millworks #6  
Re: Egon\'s Millworks

Great Job Egon;

What size is the band saw? Are you using 2-3 tpi with a deep gullet?

Have fun.

Dane
 
   / Egon's Millworks
  • Thread Starter
#7  
Re: Egon\'s Millworks

Higgy:

14 inch with extension. 3/4 x103 in. 3 TPI blade.

Egon
 
Last edited:
   / Egon's Millworks #8  
Re: Egon\'s Millworks

Egon,
You labled your picture "sawmill in action" but I guess you can't saw and take the pic at the same time, so I am interested in some more info on that set up. Do you have another post somewhere explaining this- like in the build it yourself section? How stable is the saw guide? and how do you hold it against the log? I presume the pic shows the blade in the up position because of the weight of the motor but it cuts in the down position? Do you use ripping chain?
 
   / Egon's Millworks #9  
Re: Egon\'s Millworks

I will need to get the extension, I have a bunch of resawing to do as well, but I do not have the throught size you do. Nice job. /forums/images/graemlins/grin.gif
 
   / Egon's Millworks #10  
Re: Egon\'s Millworks

<font color="blue"> A wooden mallet with a square handle? Don't believe I've ever seen one like that before. </font>

Bird, I could not help but think you never saw a "square peg in a round hole" either... /forums/images/graemlins/grin.gif

Egon...I'm turning green now...I want to do the same thing...but it is not practical...where I am... /forums/images/graemlins/frown.gif

PS...it's not that little bit of Irish blood that is part of me that is causing this green problem either...I think it's the "I wanna be like Egon syndrome..." /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

1981 CASE 580D BACKHOE (A51242)
1981 CASE 580D...
2022 ONYX RX34 FLOOR SWEEPER (A50458)
2022 ONYX RX34...
2018 Ram 3500 Bucket Truck with Duralift DTS29 - 34FT Walk-In Bucket, HEMI Gas, 98K Miles (A51039)
2018 Ram 3500...
Brown BDH-750 Disc Harrow (A50490)
Brown BDH-750 Disc...
2017 KOMATSU PC228USLC-10 EXCAVATOR (A51242)
2017 KOMATSU...
2016 CATERPILLAR 259D SKID STEER (A51242)
2016 CATERPILLAR...
 
Top