Oil & Fuel Effect of wrong hydraulic oil?

   / Effect of wrong hydraulic oil? #1  

rsl360

New member
Joined
Jun 5, 2018
Messages
14
Location
Cape Cod, MA
Tractor
electrak e12, e15, e20, Terramite T9 4WD
I am aware that one cannot put "normal" hydraulic oil into a Terramite. (a fairly recent T9 in this case) But how sensitive is it to contamination? I just got a new hydraulic cylinder and it was tested using normal (EVIL!) hydraulic oil. Obviously I can pour out what's in there. Is that enough, or do I do a thorough flushing with the correct oil? And even then, how much is thorough enough?

Does anyone know specifically why hydraulic oil in not compatible with our tractors?

R
 
   / Effect of wrong hydraulic oil? #2  
I am aware that one cannot put "normal" hydraulic oil into a Terramite. (a fairly recent T9 in this case) But how sensitive is it to contamination? I just got a new hydraulic cylinder and it was tested using normal (EVIL!) hydraulic oil. Obviously I can pour out what's in there. Is that enough, or do I do a thorough flushing with the correct oil? And even then, how much is thorough enough?

Does anyone know specifically why hydraulic oil in not compatible with our tractors?

R

I don't have an answer to your question, but where on the Cape are you?
 
   / Effect of wrong hydraulic oil? #3  
Just pour out the bad stuff and refill with the good. Won't be enough of the bad stuff in there to do any harm.

Wash it out with diesel if you're unsure. Low sulfur diesel is pretty good stuff now. In removing the sulfur, they've removed essentially all the bad stuff. For instance, I stored a Benz with fuel tank full of older type (before low sulfur) diesel for 4 years. It was BROWN when we came back.

Recently, I became concerned that my 8 year old low sulfur diesel in the 60 gallon tank of our generator could be brown. It isn't. I'm just gradually using some in my tractor to get it down to about 20 gallons. After that, I'll put fresh low sulfur in the tank.

A tad of diesel left over in the hydraulic cylinder after the flush won't be a problem.

Ralph
 
   / Effect of wrong hydraulic oil? #4  
IMHO hydraulic oil requirements from equipment mfg’ers are usually set by the pump OEM’s in their systems. The cylinders and valves don’t really care what get run through but pumps need to be happy and cool. What is Terramite recommending for fluid.....motor oil?
 

Tractor & Equipment Auctions

2025 K1912 UNUSED Metal Livestock Shed (A50860)
2025 K1912 UNUSED...
2012 Ford F-350 Omaha Crane Service Truck (A48081)
2012 Ford F-350...
1992 Effer 7600 2S Knuckleboom (A49346)
1992 Effer 7600 2S...
2021 Chevrolet Silverado 1500 Custom Crew Cab Pickup Truck (A48081)
2021 Chevrolet...
2008 Ford F-250 Knapheide Service Truck (A50323)
2008 Ford F-250...
2022 BANDIT 2550TK STUMP GRINDER (A51242)
2022 BANDIT 2550TK...
 
Top