Dual Acting Cylinder vs. Single Acting Cylinder on Implements

   / Dual Acting Cylinder vs. Single Acting Cylinder on Implements #1  

XxLT250RxX

Bronze Member
Joined
Jul 22, 2006
Messages
68
Location
NW Alabama
On my previous tractor there was a screw on the valve that controls the rear remotes. Turn the screw in to control dual acting cylinders on an implement. Turn it out to control single acting cylinders. How does this work on my TYM built tractor? I don’t see a screw to switch it to single acting cylinders. FYI the equipment I am trying to use is a 2021 John Deere bush hog with a single acting cylinder to raise and lower the tail wheels.
 
   / Dual Acting Cylinder vs. Single Acting Cylinder on Implements #2  
On my Kioti i had to add a return port to the transmission fill port. This is the same part you add if you install the backhoe. This accomplishes the single acting valve return path. No switching of valve controls.
 

Tractor & Equipment Auctions

MODERN AG PREDATOR 15 15' BATWING MOWER (A51406)
MODERN AG PREDATOR...
2009 International 7400 Chassis Truck, VIN # 1HTWGAAR89J160632 (A51572)
2009 International...
2013 PETERBILT 388 (A52472)
2013 PETERBILT 388...
2011 GALYEAN 130BBL VAC TRAILER (A52472)
2011 GALYEAN...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
UNVERFERTH 330 - 22-INCH EXTENTSION TUBE FOR BASE AND WING ASSEMBLY FOR RIPPER (A52748)
UNVERFERTH 330 -...
 
Top