drwjk
New member
I am trying to replace the drive belt on my LX 277. Does anyone have any helpful instructions so I don't have to take the entire back fenders off to replace it. Thanks Wayne
Drive belt replacement on LX277
- Thread starter drwjk
- Start date
- Views: 25264
-
- Tags
- john deere lx277
The kid
Elite Member
- Joined
- Apr 25, 2012
- Messages
- 3,888
- Location
- Middle Tennessee
- Tractor
- 1965 135 gasser, 1967 135 diesel
Welcome to TractorByNet.
The kid
Elite Member
- Joined
- Apr 25, 2012
- Messages
- 3,888
- Location
- Middle Tennessee
- Tractor
- 1965 135 gasser, 1967 135 diesel
Found this thru Google LX277 Drive Belt Replacement
MossflowerWoods
Super Member
- Joined
- Aug 12, 2011
- Messages
- 5,419
- Location
- Fredericksburg, VA
- Tractor
- Kioti DK50SE HST w/FEL, Gravely 60" ZTR Mower. Stihl MS290 (selling), CS261, & FS190 + Echo CS400 & 2010 F-350 6.4 PSD snowplow truck
Welcome to TBN From Virginia!
Happy :tractor: Tractoring!
Be Well,
David
Happy :tractor: Tractoring!
Be Well,
David
MossflowerWoods
Super Member
- Joined
- Aug 12, 2011
- Messages
- 5,419
- Location
- Fredericksburg, VA
- Tractor
- Kioti DK50SE HST w/FEL, Gravely 60" ZTR Mower. Stihl MS290 (selling), CS261, & FS190 + Echo CS400 & 2010 F-350 6.4 PSD snowplow truck
Wayne,
I just last weekend did the drive belt on my LX266.
I did not need to take the fenders off, I put it up on Jack stands, released the tension spring, and really the drive belt was VERY simple after that EXCEPT we did have to disconnect the steering rod. That is really the only secret I have.
Feel free to PM me if you have questions...
On a side note... Taking the fenders off was easy as pie. 4 bolts, 1 cotter pin on the hydrostat linkage, the seat nanny plug, and two man lift only due to the ackward shape. I had a cracked fuel line (search on LX266 and you should find my thread).
Best of luck sir.
David
I just last weekend did the drive belt on my LX266.
I did not need to take the fenders off, I put it up on Jack stands, released the tension spring, and really the drive belt was VERY simple after that EXCEPT we did have to disconnect the steering rod. That is really the only secret I have.
Feel free to PM me if you have questions...
On a side note... Taking the fenders off was easy as pie. 4 bolts, 1 cotter pin on the hydrostat linkage, the seat nanny plug, and two man lift only due to the ackward shape. I had a cracked fuel line (search on LX266 and you should find my thread).
Best of luck sir.
David
Briana03
Elite Member
Welcome to TractorByNet!
I moved your thread to the John Deere Lawn & Garden forum.
I moved your thread to the John Deere Lawn & Garden forum.