DK65 Hydraulics stall at first startup

   / DK65 Hydraulics stall at first startup #1  

pinus

Member
Joined
Apr 2, 2007
Messages
36
I thought I had posted this and was following up chasing my problem. Its a 2003 DK65 that maybe 50% of the time when you first start it after sitting it takes a minute or two for what seems to be the pump to pickup fluid and be able to raise the loader, steer, or raise the 3 point. You can feel it pulse or lightly jump when it picks up and is ready. I changed filters with no luck. Some have suggested sucking air on the hose part of the line, possible o rings bad above the filters, and maybe other things related to tubes.

Any of you have suggestions or dealt with a similar issue?
 

Tractor & Equipment Auctions

2015 CATERPILLAR D6K2 XL CRAWLER DOZER (A51242)
2015 CATERPILLAR...
E-Z Trail 675 Grain Cart (A50514)
E-Z Trail 675...
8' GREEN CHAIN LINK FENCE (A51244)
8' GREEN CHAIN...
2015 Chevrolet Silverado (A50323)
2015 Chevrolet...
2004 30ft S/A Scissor Pontoon Boat Trailer (A50324)
2004 30ft S/A...
(10) 2 PLUG VALVES (A52472)
(10) 2 PLUG VALVES...
 
Top