Rhinorider
Bronze Member
Does anybody know off the top of their head what the GPM and pressure is on the DK45 HST SE rear remote? Just thought I would check before trying to find a flow meter and pressure gauge.
DK45 HST rear remote GPM/Pressure?
- Thread starter Rhinorider
- Start date
- Views: 1440
nc redneck
Platinum Member
- Joined
- Dec 19, 2012
- Messages
- 563
- Location
- Apex nc
- Tractor
- Kioti Dk45SE Sold Kubota BX 2200 Sold Kubota B 3200 Loader WR Long 4 in 1
Pressure should be 2600. I think flow is 28 GPM not sure on this one it has been a while since I looked it up.
OP
Rhinorider
Bronze Member
thanks red, i finally found it in the loader manual. 2600 psi @10gpm.
CJONE
Veteran Member
Man I wish it was 28! That would save me from building a pto driven power pack. CJ
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
It takes about 50 HP to produce 28 GPM at 2600 for the hyd pump alone.
What is driving the rest of the tractor.
I believe the hyd pump is about 16.8 GPM.
What is driving the rest of the tractor.
I believe the hyd pump is about 16.8 GPM.