DK 45s with KB2385 bh

[c10]

Hello all!! new to the site, but have been watching for a few days. Lots of great info.
My question is on my kb2385 backhoe the swing is only about 20 degrees left and right. All other functions work. This is recently purchased and I noticed this problem during initial inspection. The trunion and swing cylinders appear to be new,with BH18-0100 swing cylinders. These cylinders are approx 12" long with approx 8" shaft travel at full extension.I have not been able to locate a description of the correct application-are these the right cylinders? Thanks for any help you may provide.

 

[TBN Support]

:welcome:

Welcome to the forum!

I'm going to move this thread over to our Kioti section to see if we can find you an answer.

 

[c10]

Thanks! still working around this site

 

[VictorW]

The KB2385 is kioti's older version. The KB2485, is Kioti's newer version that's been out for at least five years. I don't know the swing cylinder part number. I have the KB2375 on my CK30hst. The smaller version of yours. It will swing pretty much 90' to both sides. Your's should do the same. Sorry, I can't be of more help. There are members here that have that model bh and should be able to comment.

 

[c10]

Victor W Thanks for your input! Since I posted this I have heard from a Conn. dealer, they say my cylinders are correct for this application. That only leaves the trunnion. I could not locate a part number on the one that is installed. Maybe someone that has a kb2385 can tell me the measurement from center to center cylinder attachment on the trunnion. thanks again