Thinking I want power steering on my Massey 35 Perkins diesel but I don't want to buy the kit. I can piece this together using a hydraulic cylinder and you can purchase a steering pump that fits right onto my engine. What I am not clear on is the orbital valve or whatever it is that tells the hydraulic cylinder to push or pull. My thought is to leave the mechanical linkage as it is and add a cylinder to give assist. Can anyone school me on how I turn steering wheel rotations into fluid flow to my hydraulic steering cylinder?
DIY Massey 35 Power Steering?
- Thread starter NoPaint
- Start date
- Views: 9757
-
- Tags
- massey ferguson 35
airbiscuit
Super Member
- Joined
- Aug 28, 2004
- Messages
- 6,515
- Location
- NW Wisconsin
- Tractor
- New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
airbiscuit
Super Member
- Joined
- Aug 28, 2004
- Messages
- 6,515
- Location
- NW Wisconsin
- Tractor
- New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
rbeall
New member
https://www.tractorbynet.com/forums...ubota-post5714609.html?highlight=#post5714609
This is a good thread to look at. Do you have hydraulic ports for steering? It wasn’t all that difficult to install the orbitrol valve.
This is a good thread to look at. Do you have hydraulic ports for steering? It wasn’t all that difficult to install the orbitrol valve.
