Bwana64
Bronze Member
- Joined
- Oct 5, 2012
- Messages
- 66
- Location
- Harris & Fayette Counties, TX
- Tractor
- Kubota B6200, MF 230, JD 4240
Fortnight: A period of 14 consecutive days.
DIY Hay Ring
- Thread starter Wagtail
- Start date
- Views: 14928
stuckmotor
Super Member
- Joined
- Sep 23, 2009
- Messages
- 5,304
- Location
- Lower Up State S.C.
- Tractor
- AC WD 34 hp/3500 lbs MF 261 60 hp/5380 lbs
Thanks, Bwana. I get confused about stone and kilos, too.
nwngunner
Silver Member
Hay up here, "iowa" was running well over 200 dollars a ton for stuff with any protein in it.
farmgirl19
Elite Member
Yep, in Texas, we do need a fortnight of rain! That *might* fill my stock tank up, and then I could restock it with fish!
Really nice Hay Ring! I may have to try that idea soon!
Really nice Hay Ring! I may have to try that idea soon!
OP
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,665
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Well, it's been almost a year since I initially built the hay ring so I thought that I'd update...
As you can see it's survived with not one repair, I'm happy to report. I did belt-sand the whole structure, then double-coat painted the top rail in a pleasing colour. The rest of the wood I linseed oiled as a preservative to the elements:
If I've got a smaller round of hay then I only use 5 panels, a 5' round uses all 6 panels.
I've kept using the rope to secure the whole thing together (after I use the drop pins to position it) as the horses have never been able to knock it down with the rope binding it. There have been some interesting geometric shapes left from them straining to get that last bit of hay, but it's always stood up.
I have had to re-bend some of the tin hinges using a rubber mallet from time to time, but none of the hinges have broken.
As you can see it's survived with not one repair, I'm happy to report. I did belt-sand the whole structure, then double-coat painted the top rail in a pleasing colour. The rest of the wood I linseed oiled as a preservative to the elements:
If I've got a smaller round of hay then I only use 5 panels, a 5' round uses all 6 panels.
I've kept using the rope to secure the whole thing together (after I use the drop pins to position it) as the horses have never been able to knock it down with the rope binding it. There have been some interesting geometric shapes left from them straining to get that last bit of hay, but it's always stood up.
I have had to re-bend some of the tin hinges using a rubber mallet from time to time, but none of the hinges have broken.
