Deoxidizing, Polishing and Waxing JD 5200

   / Deoxidizing, Polishing and Waxing JD 5200 #1  

Edward. S

Platinum Member
Joined
Nov 15, 2009
Messages
846
Location
Somewhere
Tractor
John Deere
Here's a few of photos of the 5200 being all cleaned up for once in over 15 years. Hope you guys enjoy.

I used Meguiar's DA Power System with Ultimate Compound, Ultimate Polish and Ultimate Wax. I used the compound 1 time on all the body parts. Then polished 2-3 times, fenders only 1. Then finished up with wax doing 2 layers on the hood and panels and fenders one time. Before this I power washed with a 3200PSI Cold Water, then I used shop towels rubbing the surface (lots of elbow grease) :( to remove water spots, oxidation to make it easier with when using Ultimate Compound. Possibly will do the canopy in the winter. For now, its good enough for me.

Picture 1: Cleaning up and small preparation.
Picture 2: See it's all pretty again. :D
Picture 3: Cleaned all the tape off. Ready to get dirty again. :laughing:
 

Attachments

  • 2013-08-09 22.12.35.jpg
    2013-08-09 22.12.35.jpg
    519.2 KB · Views: 433
  • 2013-08-10 20.55.04.jpg
    2013-08-10 20.55.04.jpg
    524.6 KB · Views: 398
  • 2013-08-10 21.48.00.jpg
    2013-08-10 21.48.00.jpg
    493.8 KB · Views: 487
   / Deoxidizing, Polishing and Waxing JD 5200 #2  
Looks nice! Peanut butter works good to bring the black back to oxidized black plastic parts. Apparently it is the oil in the peanut butter.
 
Last edited:
   / Deoxidizing, Polishing and Waxing JD 5200
  • Thread Starter
#3  
Looks nice! Peanut butter works good to bring the black back to oxidized black plastic parts. Apparently it is the oil in the peanut butter.

Thanks, the peanut butter will be a mess to clean up though!
 
   / Deoxidizing, Polishing and Waxing JD 5200 #4  
Just a dab on a clean rag. Rub it in real good and then wipe off.
 
   / Deoxidizing, Polishing and Waxing JD 5200 #5  
Looks nice! I've got to do that to my 1050, when the temps cool some here.
 
   / Deoxidizing, Polishing and Waxing JD 5200 #6  
I should post current pictures of the 2030. I am considering pressure washing it, but NO wax! I have protective coat of oil/dirt.
 
   / Deoxidizing, Polishing and Waxing JD 5200 #7  
Hi, Zebrafive. Mine has the dirt coating too, but I am thinking of making him all purdy again, this fall. Should be the last time I need to do that for another 25 years, or more! He is rugged and sexy. What more would I want?
 
   / Deoxidizing, Polishing and Waxing JD 5200 #8  
Nice job Edward
 
   / Deoxidizing, Polishing and Waxing JD 5200 #10  
Looks nice! Peanut butter works good to bring the black back to oxidized black plastic parts. Apparently it is the oil in the peanut butter.

Although i'm a big fan of Meguires products especially for paint, there is one for black plastic from Mothers (Back to Black) that does a good job on old faded black plastic
Tractors looking good:thumbsup:
 

Tractor & Equipment Auctions

Quick Attach Skid Steer Quick Claw Grapple Industrial Grapple Rake (A53473)
Quick Attach Skid...
2016 Kawasaki 70 TM 7 Articulating Wheel loader (A53472)
2016 Kawasaki 70...
Set 4- 10-16.5 tires/wheel for bobcat (A53421)
Set 4- 10-16.5...
2018 CATERPILLAR 745 OFF ROAD DUMP TRUCK (A52705)
2018 CATERPILLAR...
84'' skid steer bucket (A53421)
84'' skid steer...
2015 Infiniti QX60 SUV (A50324)
2015 Infiniti QX60...
 
Top