Deere 2305 Vs. Kubot B7600 - B2630 compact tractor

MessickFarmEqu · Oct 9, 2005

( but am i going to be able to have all three implements on at the same time... ie. trailering? 
You can have all 3 attachment on a B2630. The MMM must be pinned up before BH is installed. )

This is also possible on the 7610 when using a Woods backhoe.

valleydweller1 · Oct 9, 2005

About a month ago I was trying to choose as well. The major turnoff I had with the 2305 is the 4 hydraulic hoses hanging down below the framerail on the passenger side. They are the price paid for having the 4-way valve on the tractor and not on the loader bracket.

Another thing I didn't like is that Deere charges over $500 for the FEL "kickstands"; they are included on the Kubota.

Just a couple more thoughts...

LBrown59 · Oct 10, 2005

***** I want the tractor to be able to have the mid mower deck on when the FEL and back hoe are on. I do not want to have to keep taking the implements on and off all the time.
havrilj 
===================
Compact Tractors
Kubota B7610 or the new B2630.
JD 4010 or 4110 / 2520

SUB COMPACT TRACTORS.
Kubota BX 23 Comes standard with a BH
MF GC 2310 Comes standard with a BH
JD 2210 and 2305 No OEM BH available

***** The Kubota BX 23 and the MF GC 2310 are designed specifically to do just that.


I have never had the FEL BH or MMM off mine.
Like you I don't like constantly playing musical implements.
In fact I would like to have a Kubota BX1500 with a front blade and a rear mounted Tiller which I would leave on it all the time too.
Right now I'm using a 1966 Bolens with a front blade and a 1967 Bolens with a rear mounted tiller
which I leave on both Bolenses to accomplish these 2 task.
The reason I'd like to up grade to a BX1500 is because it would be nice to have 4 wheel drive power steering and hydraulics for the tiller and front blade.

After 39 years of using a Bolens Tractor with a MMM front blade and a tiller and having to switch attachments every time I went to do something because it always had the wrong implement on it for doing what I wanted to do at the time you might say attachment switching became very old to me.

I love the set up and find no problems with leaving these attachments on all the time.

strokerduster · Oct 10, 2005

i had a jd2210 with 210 loader and 62c mmm. when mowing i just dropped qa bucket off. when using fel with mmm still attached you will have to raise the 3ph about every 5-10 minutes as it slowly bleeds down and mmm and ballast will drop. i have a b3030 now and remove deck (about 5 minutes) for serious loader work but leave it on for everything else. 3ph does not bleed down on it. dealer told me vast majority of mmm mower problems he sees is from fel work with mmm still attached.