Debris Forks for Ttan Pallet Forks

   / Debris Forks for Ttan Pallet Forks #1  

airbiscuit

Super Member
Joined
Aug 28, 2004
Messages
6,510
Location
NW Wisconsin
Tractor
New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
I hate dragging brush to burn piles. I have been watching for a good deal on used forks/grapple/rock bucket to no avail. On a whim I found that Titan was having a sale on forks, and got SSQA fixed width forks for $251 with free shipping! I looked around and rediscovered a couple of pieces of scrap 3" x 1/4" angle iron so I decided to build some bolt on debris forks. I bought some 3" channel iron to weld the outrigger forks to, and some 3" x 1/4" flat to be the top of the "clamps. They are 52" wide. Total cost $40 and I no longer have to drag brush!
Concept
Debris Forks Concept.jpg

Constrution
Debris Forls welded.jpg


Painted
Debris Forks Painted.jpg

Done
Debris Forks Final.jpg
 
   / Debris Forks for Ttan Pallet Forks
  • Thread Starter
#2  
Debris Forks mounted close.jpg


Loaded :)
Debris forks Full.jpg
 

Attachments

  • debris fork loaded.jpg
    debris fork loaded.jpg
    6.3 MB · Views: 266
Last edited:

Tractor & Equipment Auctions

Safety Basket (A50121)
Safety Basket (A50121)
2017 Ford F-250 4x4 Knapheide Service Truck (A50323)
2017 Ford F-250...
2015 Big Tex 70PI 15ft Pipe Top T/A Utility Trailer (A50323)
2015 Big Tex 70PI...
VERMEER RTX 130 WALK BEHIND TRENCHER (A51242)
VERMEER RTX 130...
International 56 2-Row Pull Cornplanter (A50774)
International 56...
Comfort Chute H Series Hoof Trimming Trailer (A50774)
Comfort Chute H...
 
Top