Dearborn 2 bottom model 10-1

   / Dearborn 2 bottom model 10-1 #1  

thl

Member
Joined
Jul 28, 2008
Messages
37
Location
Bridgeport Michigan
Tractor
Kubota B2150
I have a 1943 2n. It is in good running condition. Will it be able to handle a Dearborn 2 bottom model 10-1 plow? I found one today for $300. It is in good shape. Even still has the chains on it. It sat in a barn for a long time. Worth $300?

Comments welcome!

Terry
 
   / Dearborn 2 bottom model 10-1 #2  
if you buy it and it doesnt work for you, let me know, I may take it off your hands for you
 
   / Dearborn 2 bottom model 10-1 #3  
It is worth $300 as long as nothing breaks or wears out. Parts are not available at a reasonable price for that plow. Ken Sweet
 
   / Dearborn 2 bottom model 10-1 #4  
I have a Model 10-1 plow. I discovered that the frogs from an old sprung Leinbach 2 bottom plow that I had would bolt right up to the Dearborn plow shafts, so the wear parts that fit Leinbach plows (maybe Ford 101) will bolt to the Dearborn frame. I get my parts at my local Leinbach dealer. The parts are not a perfect fit, but very good fit. Mostly, the landside seems to not sit flat on the ground, but turn up towards the rear by about 2 or 3 inches, and no provision for the rolling landside. Doesn't seem to affect the plowing.
 
   / Dearborn 2 bottom model 10-1 #5  
yep.. you can get shares and whatnot for that plow still...

I'd offer 250..

soundguy
 
   / Dearborn 2 bottom model 10-1 #6  
yep.. you can get shares and whatnot for that plow still...

I'd offer 250..

soundguy

I could use a contact # for the supplier. I have a waiting list. I don't think my guys will pay $100 per share, Maybe $35 -$45. Ken Sweet
 
   / Dearborn 2 bottom model 10-1 #7  
I'll post over at ytmag.. I know plenty of people that have that plow and I hear them getting paerts for them commonly. I have a 10-1 as well.. but with good wear parts.

soundguy
 
   / Dearborn 2 bottom model 10-1 #8  
I'll post over at ytmag.. I know plenty of people that have that plow and I hear them getting paerts for them commonly. I have a 10-1 as well.. but with good wear parts.

soundguy

All I can find is The Amish Foundry willing to supply parts for a rebuild for $500. Ken Sweet
 
   / Dearborn 2 bottom model 10-1 #9  
will post back with what I find.

soundguy
 

Tractor & Equipment Auctions

2019 TOYOTA 8FGCU25 PROPANE FORKLIFT (A51222)
2019 TOYOTA...
2016 VOLVO VN SERIES SLEEPER (A50854)
2016 VOLVO VN...
2017 POLARIS RANGER 570 4X4 PROSTAR UTV (A51406)
2017 POLARIS...
2014 VOLVO TRUCK VN SERIES (A50854)
2014 VOLVO TRUCK...
2004 Chevrolet C5500 Shuttle Bus (A50323)
2004 Chevrolet...
2022 Wacker Neuson SM100 Mini Skid Steer (A51039)
2022 Wacker Neuson...
 
Top