D1600 II Oil help

/ D1600 II Oil help #1  

Jeremy_R

New member
Joined
May 11, 2006
Messages
18
What type oil do I use in the gearbox and how full should it be. I also discovered an oil leak where the brake linkage is going in to the axle on the right side. Is this just a seal or will I have to pull the whole thing apart.

Jeremy
 
/ D1600 II Oil help #2  
It is either 90w or utf (universial tractor fluid) if it is thin line 20w oil it is utf. It is is very thick oil it is 90w.
leak is most likely a seal.
 
/ D1600 II Oil help #3  
Use 80w90 gear oil unless you have a loader. In that case use a quality tractor hydraulic oil. Level plug is on the right side of the transmission. Look for a bolt head in the middle of the case just behind the diff. lock pedal about half way up the side. You probably have a bad seal in the brake housing. Is not difficult to replace. For parts or manuals call toll free 1-800-609-5110. satohparts.com
 

Marketplace Items

Hercules safe 53x 40 (A61569)
Hercules safe 53x...
2012 PETERBILT 367 (A60736)
2012 PETERBILT 367...
2016 INTERNATIONAL 4300  4X2 24FT BOX TRUCK (A59908)
2016 INTERNATIONAL...
2010 Deere 318D (A60462)
2010 Deere 318D...
2012 KENWORTH T800 KILL TRUCK (A60736)
2012 KENWORTH T800...
2012 International WorkStar 7400 Service Truck with Crane, VIN # 1HTWGAAR2CJ453403 (A61165)
2012 International...
 
Top