harleyizy
Bronze Member
i recently purchased a 1541. not too bad except plastic nose pieces have cracks. has anyone attempted to repair these cracks?
cub cadet panels
- Thread starter harleyizy
- Start date
- Views: 967
OhioGuy
Platinum Member
- Joined
- Jul 23, 2003
- Messages
- 595
- Location
- Northeast Ohio
- Tractor
- Ford 1220, Case 245, Cub SZ60, Cub 2284
Hey Harley,
I've owned an 1860, and an 1862 and both of those tractors had the front/top pins broke off. You see a lot of that style tractor with lange pan head screws or other methods of attaching to the mounting point.
On one of those tractors mentioned above, I used a very large but short woodscrew and was able to get it to anchor to the panel, feeding it through the mounting hole, back into the side panel.
It was a very common problem on that tractor version.
Good Luck,
Curt
I've owned an 1860, and an 1862 and both of those tractors had the front/top pins broke off. You see a lot of that style tractor with lange pan head screws or other methods of attaching to the mounting point.
On one of those tractors mentioned above, I used a very large but short woodscrew and was able to get it to anchor to the panel, feeding it through the mounting hole, back into the side panel.
It was a very common problem on that tractor version.
Good Luck,
Curt
