Cub 1863 PTO

/ Cub 1863 PTO #1  

FairportCub

New member
Joined
Apr 12, 2006
Messages
16
Hello all. I have a Cub 1863 that was given to me by my Dad. It cuts lawn beautifully. But, the PTO is always on. Therefore, it starts hard. How can I check if the problem is the switch versus the PTO itself. If I unhook the switch, would that normally cause the PTO to shut off? I'd appreciate anything.
 
/ Cub 1863 PTO #2  
Disconnecting the switch would remove power to the PTO so if it's still engaged, it must be a mechanical problem. When the PTO is disengaged you should be able to insert a .020-.025 inch feeler guage at several points between the clutch disc and the hub. There are spring-loaded bolts that can be tightened/loosened to adjust the clearance. It's possible that the spline has rusted to the disc and needs to be cleaned.

Bob B.
 
/ Cub 1863 PTO
  • Thread Starter
#3  
thanks for the info. I will try your suggestions. I really appreciate it.
 

Marketplace Items

Bainbridge,Georgia (A65640)
Bainbridge,Georgia...
1999 Sterling Dump Truck (A66285)
1999 Sterling Dump...
2020 International LT625 48" Sleeper (A62613)
2020 International...
New/Unused Wolverine Quick Attach 72in Grapple Bucket (A65583)
New/Unused...
John Deere 720 Quick Attach Loader (A65640)
John Deere 720...
378909 (A61166)
378909 (A61166)
 
Top