CT335 is DEAD

[RayJavu]

No power at all. Nothing works. No lights, etc. Battery is good & connected. No click when key is turned. All fuses are good. Bad switch relay? How do I check the relays? What else might it be?
Thanks,
Ray

 

[k0ua]

No power at all. Nothing works. No lights, etc. Battery is good & connected. No click when key is turned. All fuses are good. Bad switch relay? How do I check the relays? What else might it be?
Thanks,
Ray

there is a main fuse near the alternator i think it is abut 60 amps. it is inline and wrapped up BUT those models have notorious history of bad (open) battery cables. Measure voltage from the frame to the large starter bolt which terminates the large red cable from the battery and tell us what you have. it could be the large red cable or the ground cable either one, or their connections. Get back with us.

 

[murphy1244]

Check main fuse
then battery cables
then grounds usually that's the problem.

 

[powerscol]

On the battery cables - the ends will look connected, but the lower ring around the post will be broken. Remove the cables at the battery post and check.

 

[MESSMAKER]

On the battery cables - the ends will look connected, but the lower ring around the post will be broken. Remove the cables at the battery post and check.

That would be my guess. Factory cable end is problematic.

 

[sengli]

Mine had the same issue, and I found I had shorted something when replacing the battery. It blew that 60 amp inline fuse.

 

[winston1]

Probably not realizing your reply was to nearly an 3 year old thread.

 

[Sysop]

Probably not realizing your reply was to nearly an 3 year old thread.

That matters little. It keeps the information "relevant" for search engines to find in case someone else has the same issue. Bumping old threads is a good thing.