Loader CT 235 Loader Arms only going half way up.

   / CT 235 Loader Arms only going half way up. #1  

OH10

Member
Joined
Jan 11, 2015
Messages
33
Location
Tallmadge, Ohio
Tractor
Bobcat CT235
I was out back clearing brush and as I brought the CT 235 back up by the house I discovered the loader arms will only raise half way up. The hydraulic fluid level is full and there are no leaks, I have an EA wicked single gate grapple attached and it is working fine, so does the tilt or curl function. I checked the loader cylinders and they both look ok. I don't know how else I can trouble shoot the problem. Any ideas?

Mike OH10

Belay that last. I did find a leak just now. On one of the hose fittings by the main valve block,
 
Last edited:
   / CT 235 Loader Arms only going half way up. #2  
One of your loader hose quick disconnects is unlatched by a branch, so the oil from the cylinder can not return to the tractor. Unhook and rehook them.
 
   / CT 235 Loader Arms only going half way up.
  • Thread Starter
#3  
Thanks for the reply. I believe you are absolutely right.
 
   / CT 235 Loader Arms only going half way up. #4  
One of your loader hose quick disconnects is unlatched by a branch, so the oil from the cylinder can not return to the tractor. Unhook and rehook them.

well done
 

Tractor & Equipment Auctions

2000 PETERBILT 357 6X6 DAY CAB ROAD TRACTOR (A51406)
2000 PETERBILT 357...
2016 INTERNATIONAL 4300 24FT BOX TRUCK (A51219)
2016 INTERNATIONAL...
1996 Chevrolet IMPALA SS (A51222)
1996 Chevrolet...
INGERSOLL RAND G25 GENERATOR (A50854)
INGERSOLL RAND G25...
2014 Gillig Transport Bus (A50323)
2014 Gillig...
2003 MACK RD688S T/A DUMP TRUCK (A51406)
2003 MACK RD688S...
 
Top