Just got my CT230 back from the dealer to deal with the tach/lights relay problem and an intermittent starting problem when warm. New under dash relay was supposed to solve the issues. Got it off the trailer, ran around a little bit and then shut down. No crank or start. Last time this happened, with the relay bad (It cold started fine just no tach, head or tail lights), I left it out all night to punish it and tractor started first turn of the key in the morning. Seat safety, HST pedal, PTO levers all appear ok. Any suggestions to pursue? Did I mention the starter will turn but won't engage when you try to jump it after having this no crank condition.