OP
paulharvey
Veteran Member
Not really. I plan on trying to really flatten it out with a dremel or something. Can't really get an angle grinder or file or anything to the area.
Cross threaded spark plug in 50cc 4 wheeler
- Thread starter paulharvey
- Start date
- Views: 5321
Not really. I plan on trying to really flatten it out with a dremel or something. Can't really get an angle grinder or file or anything to the area.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
and endmill may do it... if you have a steady hand, MAYBEE a flat face cylindrical, fine cut stone in a drill press, with head flat and centered.
if it is rough cast surface, yeah, hont seal worth a darm
if it is rough cast surface, yeah, hont seal worth a darm
