Create Built?

[KevinW]

Any advice on assembly from the create. I don't have a KAMA dealer in NC, so I'm going to purchase in create.
I grew up on a farm, so my dad has a shop with a 3 Ton chain hoist on I beam across shop and a 1/4 ton electric hoist on a pivoting I beam that covers about 3/4 of the shop.
Maybe I need to start a dealership in NC?? /forums/images/graemlins/smile.gif

Thanks,

 

[JM354]

Hi,
Building one from the crate is a fine and fun way to go.
That is how I did it and I was so impressed with the quality
That my dad and I started a dealership in Maine. The most important thing is to really go over every nut and bolt.
just check everything you see. Make sure to order the EPA engine on what ever you get. If you are interested I can give you a very good price on a crate setup (Jinma EPA only). The govt is starting to crack down on non EPA stuff. Send me a PM if you would like more info.

The biggest things to remember that when you get ANY crate from any company. Parts need to come from the importer (can take time) or you buy them yourself from a dealer.
You are responsile for ALL port, customs, and warehouse fees. The figure I use for importing 1 tractor with FEL and backhoe is $1000 dollars. So you need to add this to ANY crate setup.

Regards,
John Genereux

 

[DIYGuy]

Go for it...

Crate Tractor Assembly

That's the URL to my Jinma assembly page.