rock3322
Bronze Member
My cooling fan motor does not seem to want to run all the time and my unit becomes hot. Has anyone else had this problem and what is the fix?
COOLING FAN MOTOR
- Thread starter rock3322
- Start date
- Views: 14688
DEWFPO
Veteran Member
- Joined
- Jun 2, 2007
- Messages
- 1,100
- Location
- "Up High in the Rockies"
- Tractor
- 2009 Bobcat Toolcat 5600 D
My fan runs 100% of the time as long as the engine is running regardless of engine or outside temp. The speed seems to be controlled by engine coolant temp and hydraulic fluid temp. You'd need to check if you have good hydraulic pressure and flow to the fan motor first. If you have good pressure and flow, then I'd suspect the motor. The Bobcat factory rep told me that when the engine is started the pressure to the fan motor is high for a short period of time to get the fan moving then it settles down to a lower, constant flow until needed when the coolant and hydro fluid gets hot.
DEWFPO
DEWFPO
Last edited:
theoshin
Silver Member
big diff between model c and d's. d's have a much larger fan and do not overheat. c's smaller but do overheat in summer if the cover is clogged with grass/etc. on the c and earlier models you need to keep radiator cover clean in warm temps. i had a c and 2 ds. both d's never overheat and fan turns on high depending on need/hydro temps but never runs on high continuously
ts