babydaniel
New member
I have a Construction King Case 580B backhoe and I bought a manual for it but was send a manual for the 580C - would they be the same or similar
Thanks
Andrew
Thanks
Andrew
Backhoe CONSTRUCTION KING CASE 580B
- Thread starter babydaniel
- Start date
- Views: 1501
RDrancher
Veteran Member
Andrew, post your question at this link Tractor/Loader/Backhoes. There are a bunch of guys over there with 580's.
BukitCase
Elite Member
- Joined
- Feb 17, 2012
- Messages
- 2,756
- Location
- Albany OR
- Tractor
- Case 580B, Long 460, Allis-Chalmers 160
Andrew, I have a 580B and correct manuals, and in searching out parts there seem to be a few things that MAY be different between B and C models -
Equipment Parts Source ( Equipment Parts Source, Aftermarket, Case, Backhoe, Crawler, Loader, Dozer, Tractor Home Page ) has been a good source for cylinder repair kits, but you MUST know which cylinders your particular machine uses, which requires teardown of at least ONE of them BEFORE you order (Don't ask how I know) - Case used at least two different diameter cylinders on the hoe boom on the B's, plus one piece or split pistons, etc - same with some starter parts and probably others.
John's link (thanks, John) looks like a good resource, now bookmarked :=)
HTH... Steve
Equipment Parts Source ( Equipment Parts Source, Aftermarket, Case, Backhoe, Crawler, Loader, Dozer, Tractor Home Page ) has been a good source for cylinder repair kits, but you MUST know which cylinders your particular machine uses, which requires teardown of at least ONE of them BEFORE you order (Don't ask how I know) - Case used at least two different diameter cylinders on the hoe boom on the B's, plus one piece or split pistons, etc - same with some starter parts and probably others.
John's link (thanks, John) looks like a good resource, now bookmarked :=)
HTH... Steve
Wolfy
Veteran Member
Andrew, I had that issue with a front end loader. Most info was relevant, however some minor things were off.
