combination temperature and pressure gauge for RFH system needed.

[jim gerken]

All the combo gauges I see on line are seemingly designed for boilers, with full scale readings of 75 psi, and 320 degrees. My system is water heater based, and will run at about 15 psi and max temp of 120. It would be really great to find a combo gauge with appropriate full scale ranges. Say 0-30 psi, and 50-180 or 200 degrees F. Does anyone know where I can find this? Thanks.

 

[George2615]

Here's one that reads 0-50 PSI and 32-248 * F.
I use a similar gauge on my HW boilers at work.
Do an online search for combination PSI and Temperature gauge. Many sites will come up and you just need to look for the range you want.


Watts Radiant 705075 Bottom Mount - Temperature and Pressure Gauge - 1/2-Inch MNPT